Marine Pump

YCH Automatic Bilge Pump will start to operate automatically while detecting the water level comes up! While the water level reaches the high set-point, the pump will activate automatically and start to drain the water. When the water level reaches the low set-point, the pump will automatically stop draining the water. We also provided the Manual wire for the motor, it could be switched to manual function if necessary. We can put your own logo on the product.

Work with 6, 12, 24, or 32 VDC Bilge Pump Mounting screws, Fuse holder and 15A Fuse are included. Wire ends or fuse holder must not contact the water at any time. Measure：Length 106 mm X Width 80.2 mm X High 53.0 mm Weight：0.14 KGS Color ：Dark Blue, White

YCH Bilge Pump has been manufactured to a high state of efficiency. Higher capacity, low power consumption, high quality Water Cool motor. Stainless motor shaft. All electrical connections must be placed above the highest water level. The wire connections ought to be sealed with a marine sealant to prevent wire corrosion.

Bilge Water Alarm A float switch should be mounted approximately 8 inches above the existing float switch that operates the Bilge Pump. Measure：Length 83 mm X width 63 mm Weight ： 0.04 KGS

Bilge Water Alarm A float switch should be mounted approximately 20 mm above the existing float switch that operates the Bilge Pump. A second alarm float switch is than installed approx 200 mm above the pump float switch. Measure：Length 115 mm X width 63 mm Weight ： 0.08 KGS