Products

Marine Pump

1-5 of 5
  • Automatic Bilge Pump

    Automatic Bilge Pump
    WMB432~484

    Automatic Bilge Pump

    YCH Automatic Bilge Pump will start to operate automatically while detecting the water level comes up! While the water level reaches the high set-point, the pump will activate automatically and start to drain the water. When the water level reaches the low set-point, the pump will automatically stop draining the water. We also provided the Manual wire for the motor, it could be switched to manual function if necessary. We can put your own logo on the product.
  • Automatic Float Switch

    Automatic Float Switch
    WMA492

    Automatic Float Switch

    Work with 6, 12, 24, or 32 VDC Bilge Pump Mounting screws, Fuse holder and 15A Fuse are included. Wire ends or fuse holder must not contact the water at any time. Measure:Length 106 mm X Width 80.2 mm X High 53.0 mm Weight:0.14 KGS Color :Dark Blue, White
  • Bilge Pump

    Bilge Pump
    WMA432~484

    Bilge Pump

    YCH Bilge Pump has been manufactured to a high state of efficiency. Higher capacity, low power consumption, high quality Water Cool motor. Stainless motor shaft. All electrical connections must be placed above the highest water level. The wire connections ought to be sealed with a marine sealant to prevent wire corrosion.
  • Pump Control Panel SMALL

    Pump Control Panel
    WMA497

    Pump Control Panel SMALL

    Bilge Water Alarm A float switch should be mounted approximately 8 inches above the existing float switch that operates the Bilge Pump. Measure:Length 83 mm X width 63 mm Weight : 0.04 KGS
  • Pump Control Panel BIG

    Pump Control Panel
    WMA498

    Pump Control Panel BIG

    Bilge Water Alarm A float switch should be mounted approximately 20 mm above the existing float switch that operates the Bilge Pump. A second alarm float switch is than installed approx 200 mm above the pump float switch. Measure:Length 115 mm X width 63 mm Weight : 0.08 KGS